Union Pacific
Recording the progress of building the Denver’s RailRoads N Scale layout
All genuine posts are welcomed and will be acknowledged. Please submit your first post by email to: dennis@denversrailroads.com
Phase II and Phase IV combined into Phase II; Phase V becomes Phase IV
The main line between Glenwood Springs and the Wye at Denver Union Terminal (DUT) is almost complete. I just have to install the Wye track to the north of DUT, (the connection to the east is already laid), and relay two or three turnouts on the main at the Prospect Junction end of North Yard. Then I can connect the remainder of the Kato extender tracks across the module 6 & 7 divide, patch up a couple of broken tracks and start making connections to the control panels, starting back at Black Hawk. Once all of the feeders are connected to the BUS it should be possible to run a train around the loop.
The changes to the Phase numbers will be reflected in the main web site pages in the fullness of time. Reducing the number of Phases to four will align with the planned N-Scale magazine articles.
Phases 1 to 5 November 2018 update
I am not sure anyone reads this Blog except of course the Web Robots. If you do read the blog please register and make a comment, or send me an email. However the blog was started as a useful place to record the progress on my layout, so I will keep updating every so often.
Phase 1 – the Clear Creek RR continues to progress. All track is laid. All turnout motors are installed. By the end of today all of the BUS wiring will be complete. Golden Station building is complete and five other kits have been completed. In addition the scenery work and ballasting has been completed on the canyons west of Golden. The scene is ready for photographs to be taken for an upcoming magazine article, except for the addition of some model people. This will happen once they arrive by mail from the USA in about 3 weeks time. Two new control panels for Black Hawk (Power District 2c) and Idaho Springs (Power District 2b) are ready and awaiting artwork and connections. Golden is in Power District (PD) 2a, Glenwood Springs in PD2 and the Grand Jct Loop in PD1.
Work will shortly commence on adding the industries and rolling stock into the “Ship It” Prototypical Switch List Generator program.
Phase II – the Main Line from Grand Jct Loop to D&RGW North Yard. All track laying and BUS wiring is complete, and in the process of being tested. The point motors have been installed and are currently being connected to the Power District 2 & 3 control panel and to Relay switches which will change the lights on the control panel to indicate direction. 30 NCE BD-20 track detectors have been purchased for installation in the return loop and the main line. An NCE AIU01 Auxiliary Input Unit has been purchased to link the track detectors with the Railway & Co “Train Controller” computer system.
East Denver Belt Line – all track has been laid and most of the turnouts will be controlled by Caboose Industries ground throws.
Phase III – Denver Union Terminal (DUT). Rod has finished laying track in the main station complex. Installation of the point motors has commenced. This is expected to take some considerable time. When the track BUS and point motors have been tested we will carry on installing the C&S/CB&Q Rice Yard, the coach yards and industrial branches.
Phase IV – D&RGW North Yard and industries and the UP 36th Yard. All work is on hold pending the completion of the work on Phase II as above.
Phase V – the D&RGW Main Line from Denver to Glenwood Springs and a branch line to Craig. Peter has laid all of the cork roadbed for this phase and I have finished the Gore Canyon scenery for the time being. Track laying for this phase will begin after phases 3 and 4 are complete.
