Wiring Update

Recording the progress of building the Denver’s RailRoads N Scale layout

All genuine posts are welcomed and will be acknowledged. Please submit your first post by email to: dennis@denversrailroads.com

Wiring Update

5th October 2021 | Dennis Turner | N Scale | No Comments

Getting closer to operating, or at least switching with my Proto-Throttle, this part of the layout.

All but a couple of feeder wires have been installed in modules 11 and 11a.

All 40 switch motors (mainly Peco twin coil snap point motors and a few Kato) wired to the front of the layout. The green wires are the “common” side of the point motors. They await being attached to DCC accessory decoders and the NCE Mini Panel.

About 28 NCE BD20s installed and connected to the main lines and the staging tracks.

This image has an empty alt attribute; its file name is IMG_0438-1024x768.jpeg — The two modules were to heavy for me to lift so I had to enlist the help of two pulley’s (aka block & tackle) to do the job.

Who said that DCC only needed two wires!

Copyright © 2017. All Rights Reserved.

Wordpress Themes designed by i3dTHEMES